CLOGGER ARCMAX MEN'S ARC RATED FIRE RESISTANT CHAINSAW TROUSERS T91F

CLOGGER ARCMAX MEN'S ARC RATED FIRE RESISTANT CHAINSAW TROUSERS T91F

Designed for tree workers with fire or arc flash risk, Arcmax trousers uniquely deliver on the promise of fire protection with all components fully FR rated including the chainsaw protection material.

Description: 

Arc-flashes or accidents involving fire can cause horrific burns or even be fatal. To protect you against these hazards, Clogger’s fire resistant range of chainsaw protective clothing are just that – fully fire resistant. 

The Gen2 of Arcmax FR chainsaw trouser has been made stronger and more durable, yet lighter than the previous model. This garment has been designed to reduce your physical effort and to make your movements easier. Clogger also incorporated some great innovative features to make utility arborists’ job easier. With Arcmax Gen2, you get the protection you need, plus you get the comfort. 

• Certified by Bureau Veritas NZ Ltd to AS/NZS4453.3:1997 

• Uses Arrestex FR fully fire resistant chainsaw protection material which is light, cool and quick drying, rated to 3,600 ft/min (850 ft/min above the standard) 

• Protection from waist to the ankle, exceeding the standard by 15% 

• Fully fire-resistant, including outer fabric, chainsaw protective fabric and lining 

• Outer fabric arc rated to 8.2 cal/cm² 

• Total weight only 1.07kg 

• 50% Nomex ® / 50% FR viscose ripstop outer fabric, for high tear strength and durability

 • Reflective tape at the lower leg complies with the performance requirements of high visibility standards: ANSI 107:2015; AS/NZS 1906.4:2010 

• Elasticized waist for a snug fit & extra comfort 

• Opening in hem for trash removal 

• Belt loops to fit a 2 inch belt 

• Two zipped hip pockets and a zipped pocket on the left thigh for ease of access while wearing an harness 

Certifications: 

Australia and New Zealand: Certified by Bureau Veritas NZ Ltd to AS/NZS4453.3:1997 Outer fabric rated at 8.2 cal/cm2; higher than the minimum level often specified of HRC category 2 which is 8cal/cm2. 

Retroreflectivity: complies with AS/NZS 4602, ANSI 109 and Z96.